One Guard for Every 360 Helmet: Choose Your Gray-Nicolls 360 Neckguard Model
Overview
The Gray-Nicolls 360 neckguard is a clip-on neck protector for batters wearing a Gray-Nicolls 360 helmet. It comes in three models: Elite Junior 360, Atomic 360 and Ultimate 360. Each fully conforms to BS 7928:2013+A1:2019. Dual inserts lock into the helmet's grille to shield the base of the head.
Choose the model that matches your helmet. The Elite Junior 360 fits the Elite 360 Junior helmet. The Atomic 360 fits the Atomic 360 helmet. The Ultimate 360 fits both the Ultimate 360 and Ultimate 360 Pro helmets.
A neckguard covers the gap between the back of the helmet and the neck. The inserts are dual-density EVA, a firm foam that deflects the ball and spreads the force. With Christmas ahead, it is a sensible add-on for any batter getting ready for April.
Features
- Tested to the current standard: every model fully conforms to BS 7928:2013+A1:2019.
- A model for each helmet: pick Elite Junior 360, Atomic 360 or Ultimate 360 to match your helmet.
- Secure fit: the guard locks onto the grille, so it stays in place when you duck or turn.
- Impact spread out: dual-density EVA passes force through the guard, grille and shell together.
- Easy to adjust: hook-and-loop fasteners let you set the final tension by hand.
- One size for all: a single pair works on every size of its matching helmet.
Design and Materials
Each neckguard comes as a pair of black inserts. The inserts use dual-density EVA, which means two foam layers of different firmness. Together they help deflect the ball and soak up the energy of a hit. Each Gray-Nicolls 360 neckguard model shares this build.
Channels moulded into the outside of each insert slot onto the welded metal grille. Hook-and-loop fasteners then hold the final fit. Gray-Nicolls designed and tested each guard to give 'Short' coverage under BS 7928:2013+A1:2019. That describes how far down the neck the protection reaches.
Key Technologies
BS 7928:2013+A1:2019 Conformation: Each guard fully conforms to the current British Standard. It is tested to give 'Short' coverage under that standard.
Dual Neckguard Inserts: Two inserts work in synergy with the 360 grille. They shield the base of the head.
Grille Locking Channels: Channels in the exterior of the guard locate and lock to the welded metal grille. That gives robust retention.
Hook-and-Loop Fasteners: Fasteners tension and secure the final fit. They keep the guard snug against the grille.
Dual-Density EVA Construction: Two densities of EVA foam deflect ball strikes. They disperse force through the guard, grille and shell.
Specifications
| Specification |
Details |
| Brand |
Gray-Nicolls |
| Models |
Elite Junior 360, Atomic 360, Ultimate 360 (2027) |
| Elite Junior 360 fits |
Elite 360 Junior helmet |
| Atomic 360 fits |
Atomic 360 helmet |
| Ultimate 360 fits |
Ultimate 360 and Ultimate 360 Pro helmets |
| Standard |
BS 7928:2013+A1:2019 |
| Coverage |
Short (per BS 7928:2013+A1:2019) |
| Construction |
Dual inserts, dual-density EVA |
| Fitting |
Locking channels and hook-and-loop fasteners |
| Size |
One size, fits all sizes of the matching helmet |
| Colour |
Black |
VKS Review
If you wear a Gray-Nicolls 360 helmet, a matching neckguard completes the set. The guard locks to the grille, so it moves with the helmet rather than flapping about. The EVA inserts sit firm at the back of the neck. You can turn and duck without the guard shifting.
The one thing to get right is the model. Each guard is made for specific helmets, so it will not fit other brands or other Gray-Nicolls ranges. If you are unsure which helmet you own, check the label inside the shell. For most 360 helmet owners, the Gray-Nicolls 360 neckguard is a simple, low-cost upgrade. VKS has fitted cricket kit for over 50 years, and you can have it fitted in our Ealing store.
Q&A Section
Which neckguard model do I need?
Match it to your helmet. Elite Junior 360 fits the Elite 360 Junior, and Atomic 360 fits the Atomic 360. Ultimate 360 fits both the Ultimate 360 and Ultimate 360 Pro.
Does one pair fit every helmet size?
Yes, one pair works on all sizes of its matching helmet. You only need to choose the right model. That also means juniors do not need a new guard when they move up a helmet size.
Can I use these on another brand of helmet?
No, each model is made to lock onto a specific Gray-Nicolls grille. A different grille shape will not hold it securely. Other brands make their own matching neckguards.
What does 'Short' coverage mean?
It is a coverage category used in BS 7928:2013+A1:2019. It describes how far down the neck the guard protects. Gray-Nicolls designed and tested all three models to that category.
How do I fit the neckguard?
Line up the channels on each insert with the grille at the back of the helmet. Press them on, then tighten the hook-and-loop fasteners. Our team can fit it for you in store if you prefer.
Should I replace the neckguard after a hard hit?
Check it after any heavy blow. Cracks, tears or a loose fit mean it may not protect as well. If in doubt, replace it, since it costs far less than a helmet.
Can I get the Gray-Nicolls 360 neckguard fitted in store?
Yes, bring your helmet to our London store in Ealing. Our team will pick the right model and fit it. They can also check the helmet still sits correctly.
